Top Tips on Choosing Protective Clothing for The Summer

Choosing the most appropriate protective clothing for the summer can be a difficult and confusing task. With so many differing standards, regulations, and a checklist of criteria including size, design, cut, colour, and cost, certainly there are a number of factors to consider. Read on to find out the tips to help you choose the right summer protective clothing.

1. Assess the Risk Associated with the Working Environment

Identify the substances that are present in your work area: particulates, liquids, and gases. Also, you should look at the hazards associated with the substances, such as reactivity, dermal toxicity, etc. Be sure to identify the physical or environmental hazards, such as machinery, sharp instruments, or rough surfaces.

2. Fabric Selection

The nature of the hazard identified will dictate the right protective clothing. It’s true that when workers are more comfortable, they are more productive. Therefore, it is imperative to consider choosing lightweight, breathable, and comfortable fabrics to help prevent heat stress.

If you’re working with non-hazardous substances such as sand, dirt, or grime, it’s generally recommended to go for a fabric that demonstrates maximum particulate holdout properties. Find a fabric that is highly resistant to particulates from the outside but allows moisture, air and vapour to pass through. This will increases the level of comfort.

3. Check the Seam Construction

It is also recommended to look for protective clothing with seams on the back instead of the front. Why? Well, seams on the back usually provide more protection up front, where it is needed the most.

There are different types of seams, they include:

  • Serged Seams

This is a basic stitched seam which is the most common protection apparel, where much resistance to perilous substances is not needed. If you want the strongest and most durable seam, then you should consider the one with a three-thread overlap stitching.

  • Taped Seams

It is a serged seam, but reinforced with a film tape that’s highly resistant to water and many liquid chemicals. Taped and serged seams are normally found in liquid chemical protective clothing.

  • Bound Seams

Bound seams are reinforced with binding for strength as well as tear resistance.

4. Look at the Design and Size

Design and sizing is also another important consideration to ensure effective use. It is therefore very so important that you evaluate the design of the apparel. If the potential exposure to risk is moderate or high, workers are required to have full-body garments. However, where the exposure is low, the risks may be isolated to particular body areas. Working in such environments may require sleeve protectors or aprons.

What is PPE?

In the United Kingdom, employers are expected to provide, replace as well as pay for personal protective equipment. You need to know that PPE is used in the event that all the measures fail to control exposure. In other words, it will only protect the wearer when he or she is putting it on. In case it fails, then an employee should not anticipate any form of protection at all.

Types of PPE

There are different types of PPE you will come across. The common types include Respirators, protective gloves, eye protection, protective clothing and Protective footwear just to mention a few of them. In the process of making a decision about PPE, you need to ask your manufacturer, supplier or trade association the following question before making your final decision.

Is it suitable for your working conditions in any way?

How do you tell when it requires replacement?

Will it offer you with the required level of protection?

What training or maintenance practice should you undertake well?

On the other hand, employees should understand why PPE is important and how they can use the same correctly. Otherwise it will not protect them as expected. They need to find out the following

Does it fit properly?

Is it comfortable to wear?

If PPE requires cleaning and maintenance, how should it be undertaken?

In conclusion, the right choice of PPE and work wear will make a whole difference as far as effective management of health is concerned. There are a wide range of items that you can choose from. Before you buy anything, ensure that you understand the latest regulation changes governing the ever evolving sector. In order to avoid accidental injuries from taking place, you need to wear PPE. In addition, an employee does not have permission to request for employees to pay for PPE under any circumstances.

Why Hard Hats are Important in the Workplace

Hard hats are essential in the workplace especially for those who work in the construction, electrical, plumbing, manufacturing or welding industry. These hats are designed to protect an individual’s head from various workplace hazards including collision impact, electrical shock, falling debris, and flying objects. They can also protect the eyes and neck and save an individual’s life.

Offer Penetration and Impact Resistance

Hard hats are essential because they offer significant penetration and impact resistance. The material used is quite resilient and they have a lining and wide brim that protects the head, face, and neck from falling and flying objects in the workplace. They also increase safety in case you bump your head on piping or other overhead objects.

Protect Against Electrical Hazards

The hard hats can protect against electrical hazards. These hats have insulation material to offer protection against burns and high-voltage shock for those who work around wires and power lines.

Reduce Discomfort

Using a hard hat in the workplace can also reduce discomfort during hot weather. The hats have ventilation holes that ensure the wearer remains cool when it is hot.

Hard hats are mandatory and employers are required to provide them for every employee who is exposed to electrical hazards and falling and flying objects. Several individuals suffer from head injuries each year and some are fatal. Failure to use these hats is directly related to fatal head injuries. This has made hard hats a crucial feature in the workplace.

It is important to wear the right kind of hard hat for the environment you work in. Some of these are specifically designed for the construction industry where there is a greater risk of falling and flying objects while others offer additional shock absorption for those who work with electricity. Hard hats are more effective when they fit properly. They should also allow necessary adjustment to suit individual requirements.

It is evident that hard hats are vital in the workplace but some individuals wonder whether it is necessary to wear them in instances where there is no obvious danger. These hats should always be used even when the hazards are not apparent. A workplace environment can become hazardous at any moment. Hard hats are designed with this aspect in mind. They protect you from sudden hazards. Accidents occur without notice and you may not have time to move out before an object falls or substance spills on you. Wearing hard hats can make injuries less severe and this allows you to continue working after recovery.

Importance of Safety Workwear


Most employers are aware that safety workwear is a requirement under British law. Using the right workwear for the job is a critical factor in the working environment. Those who flaunt this requirement do so at their own risk. For instance, in case of an injury, an employer who does not provide his or her workers with the correct protective equipment could be sued. Therefore, providing the employees with such basic equipment is a great way to avoid costly lawsuits.


Safety workwear comprises all the gear that is required by employees in order to keep them safe from hazards at the workplace. Failing to provide the workers with this equipment could cause a construction site to be shut down. In fact, this is the first thing to be checked by safety regulation officials. Once an occupational safety and health official arrives at a construction site, they first check if all workers have all the necessary protective equipment required for the job. Generally, this equipment is designed to make sure that the workers do not have less quality of life due to their work.

It is important for all employers to take time to understand the purpose of this. They should not only do it to comply with government regulations, but also because it concerns the health of fellow human beings. Providing employees with the right safety equipment means they are able to concentrate fully on the task. When an employee does not have full confidence in the protectiveness of their equipment, quality of work deteriorates. This because, they are always doing their work with one eye open for potential hazards at the workplace. In addition to that, a company is likely to attract a more competent skilled force if it has such measures in place.
When an organization fails to protect the health and safety of its employees, it will lead to bad publicity. With the revolution in how information is shared, it will likely reach the masses very fast. This could have a disastrous effect on the organisation’s returns. This equipment is usually comparatively cheap and easy to access. Thus, it is foolhardy for a company to try to avoid such a responsibility by denying employees the right safety equipment. Choosing the right equipment should be done in consultation with the employees. Innovations in technology mean there are many options available from which an organisation can choose from. One must ensure that the equipment they choose does not interfere with how efficiently workers are able to accomplish their tasks.


Providing workers with the right safety workwear is not only great, but it is a requirement under British law. Having satisfied employees lead to an increase in productivity. Besides that, it portrays the company as compassionate about the welfare of fellow human beings. Because the requirements of safety workwear are so valid, it is important to choose the right equipment. This has the advantage of protecting the employees while saving the organisation unnecessary exorbitant costs. The easiest way to do this is to hire a quality health and safety expert. In addition, one can outsource the service of a consultancy firm if employing one permanently is more expensive.

Health and Safety in the Workplace

Health and Safety goes back almost 60 years, and it has become an important part of every workplace!

I have put together a timeline which reminds everyone how Health and Safety has developed since the first time it was introduced back in 1956.

Before 1956 there weren’t any laws that affected Health and Safety, but come along “The Agriculture Health and Safety act”, ultimately this was developed to ensure all workers and even children were kept safe around agricultural apparatus. Out of all the laws, the most important one must have been the investigation  and reporting of disease or accidents (which still today plays a big part in society!)

Come 1974, a revolutionary act was created which changed Healthy and Safety in the workplace for everyone, it was called “The Health and Safety at Work act” and when this was introduced it was meant to connect with both employers and employees. To ensure that this act was forced and regulated, the HSC (the Health and Safety Commission) was founded.

Along come the eighties, 1981 was when the HSC decided it was time to introduce the Health and Safety First Aid regulations, this demanded that an employer must ensure the appropriate first aid equipment is available to all workers.

With there being so many different workplace hazards, such as chemicals, electricity, heat sources, machinery, manual handling and even slip and trip hazards just to name a few… you can really see why these regulations have become a requirement for all workplaces to follow and why having the appropriate equipment is a must for all employees!

What is appropriate equipment? Ultimately it depends on what your job role includes, for example: A builder:

Head protection (hard hat) would protect them against head impact.

Eye protection (goggles) to ensure that wind or air movement won’t blow dust or particles into their eyes.

Hand protection (gloves) ultimately this will protect them from cuts, slivers, punctures or even electricity.

Foot protection (boots) they need them to protect them from the impact of falling or rolling objects, slippery or uneven surfaces, stepping on sharp objects and even electrical hazards.

Hearing protection (ear defenders) if they are working in a noisy environment, they will require these to protect them from excessive noise.

High visibility clothing (high vis vest) should the workers be working at night, or in low light, they should wear one.

Breathing protection (dust mask) in some scenarios, the builder may be working around potentially dangerous vapours or even just dust could be dangerous.