Top Tips on Choosing Protective Clothing for The Summer

Choosing the most appropriate protective clothing for the summer can be a difficult and confusing task. With so many differing standards, regulations, and a checklist of criteria including size, design, cut, colour, and cost, certainly there are a number of factors to consider. Read on to find out the tips to help you choose the right summer protective clothing.

1. Assess the Risk Associated with the Working Environment

Identify the substances that are present in your work area: particulates, liquids, and gases. Also, you should look at the hazards associated with the substances, such as reactivity, dermal toxicity, etc. Be sure to identify the physical or environmental hazards, such as machinery, sharp instruments, or rough surfaces.

2. Fabric Selection

The nature of the hazard identified will dictate the right protective clothing. It’s true that when workers are more comfortable, they are more productive. Therefore, it is imperative to consider choosing lightweight, breathable, and comfortable fabrics to help prevent heat stress.

If you’re working with non-hazardous substances such as sand, dirt, or grime, it’s generally recommended to go for a fabric that demonstrates maximum particulate holdout properties. Find a fabric that is highly resistant to particulates from the outside but allows moisture, air and vapour to pass through. This will increases the level of comfort.

3. Check the Seam Construction

It is also recommended to look for protective clothing with seams on the back instead of the front. Why? Well, seams on the back usually provide more protection up front, where it is needed the most.

There are different types of seams, they include:

  • Serged Seams

This is a basic stitched seam which is the most common protection apparel, where much resistance to perilous substances is not needed. If you want the strongest and most durable seam, then you should consider the one with a three-thread overlap stitching.

  • Taped Seams

It is a serged seam, but reinforced with a film tape that’s highly resistant to water and many liquid chemicals. Taped and serged seams are normally found in liquid chemical protective clothing.

  • Bound Seams

Bound seams are reinforced with binding for strength as well as tear resistance.

4. Look at the Design and Size

Design and sizing is also another important consideration to ensure effective use. It is therefore very so important that you evaluate the design of the apparel. If the potential exposure to risk is moderate or high, workers are required to have full-body garments. However, where the exposure is low, the risks may be isolated to particular body areas. Working in such environments may require sleeve protectors or aprons.

Advertisements

Why is Respiratory Protection important in Construction?

Respiratory protection; an important part of Personal Protective Equipment in Construction Work.

In any field of construction work it is of vital importance that all employees wear the appropriate task specific P.P.E, respiratory protective equipment is one of the most important pieces of P.P.E. Whether the employee is only using hand or power tools there is still a variety of industrial sprays, dust, fumes and particulate materials, amongst other respiratory hazards on the work site.
So it is not only necessary for the sake of health consciousness to protect yourself and your workers against respiratory hazards, but it is also an obligation due to the legal Occupational Health and Safety Act.

There are gases, dusts, and toxic fumes present at every construction worksite that can make you very ill and some may even cause eventual death, some respiratory hazards such as carbon monoxide can make you unconscious or even kill you within minutes, other hazards such as asbestos can take years before they make you sick and can cause lung cancer.

There are methods such as engineering controls, for example good ventilation methods in an enclosed area, work practice controls such as using alternative cutting and grinding techniques, and administrative techniques where only the necessary workers who are performing a task are in the hazardous areas.
It is important to have a Written Safety Procedure and Risk Assessment for every task being performed that also stipulates the personal protective equipment that has to be worn for that task.

In most cases a simple dust mask will suffice but depending on the type of work and the hazardous materials other methods such as a full mask with a visor, a Welding helmet, or a respirator may be required.
Respirators and respiratory protective equipment needs to be well maintained and kept clean, and any damaged equipment must be discarded of and replaced immediately.

There are so many risks associated with breathing in harmful substances, and this is why respiratory protection can save a life, hazards in the workplace may not seem as serious to you but regular exposure to certain materials and particles can lead to chronic illnesses and can cause drastic damage to your lungs. In some cases as with extreme hazardous materials, a few short exposures can cause death.
So remember in any workplace it is not only law but of utmost importance for your and the health and safety of your employees to always wear the task specific personal protective equipment and always to follow the Written safe Work procedures and Risk assessments step by step. Take care of your own personal safety first and then that of your fellow workers.

What is PPE?

In the United Kingdom, employers are expected to provide, replace as well as pay for personal protective equipment. You need to know that PPE is used in the event that all the measures fail to control exposure. In other words, it will only protect the wearer when he or she is putting it on. In case it fails, then an employee should not anticipate any form of protection at all.

Types of PPE

There are different types of PPE you will come across. The common types include Respirators, protective gloves, eye protection, protective clothing and Protective footwear just to mention a few of them. In the process of making a decision about PPE, you need to ask your manufacturer, supplier or trade association the following question before making your final decision.

Is it suitable for your working conditions in any way?

How do you tell when it requires replacement?

Will it offer you with the required level of protection?

What training or maintenance practice should you undertake well?

On the other hand, employees should understand why PPE is important and how they can use the same correctly. Otherwise it will not protect them as expected. They need to find out the following

Does it fit properly?

Is it comfortable to wear?

If PPE requires cleaning and maintenance, how should it be undertaken?

In conclusion, the right choice of PPE and work wear will make a whole difference as far as effective management of health is concerned. There are a wide range of items that you can choose from. Before you buy anything, ensure that you understand the latest regulation changes governing the ever evolving sector. In order to avoid accidental injuries from taking place, you need to wear PPE. In addition, an employee does not have permission to request for employees to pay for PPE under any circumstances.

Why Hard Hats are Important in the Workplace

Hard hats are essential in the workplace especially for those who work in the construction, electrical, plumbing, manufacturing or welding industry. These hats are designed to protect an individual’s head from various workplace hazards including collision impact, electrical shock, falling debris, and flying objects. They can also protect the eyes and neck and save an individual’s life.

Offer Penetration and Impact Resistance

Hard hats are essential because they offer significant penetration and impact resistance. The material used is quite resilient and they have a lining and wide brim that protects the head, face, and neck from falling and flying objects in the workplace. They also increase safety in case you bump your head on piping or other overhead objects.

Protect Against Electrical Hazards

The hard hats can protect against electrical hazards. These hats have insulation material to offer protection against burns and high-voltage shock for those who work around wires and power lines.

Reduce Discomfort

Using a hard hat in the workplace can also reduce discomfort during hot weather. The hats have ventilation holes that ensure the wearer remains cool when it is hot.

Hard hats are mandatory and employers are required to provide them for every employee who is exposed to electrical hazards and falling and flying objects. Several individuals suffer from head injuries each year and some are fatal. Failure to use these hats is directly related to fatal head injuries. This has made hard hats a crucial feature in the workplace.

It is important to wear the right kind of hard hat for the environment you work in. Some of these are specifically designed for the construction industry where there is a greater risk of falling and flying objects while others offer additional shock absorption for those who work with electricity. Hard hats are more effective when they fit properly. They should also allow necessary adjustment to suit individual requirements.

It is evident that hard hats are vital in the workplace but some individuals wonder whether it is necessary to wear them in instances where there is no obvious danger. These hats should always be used even when the hazards are not apparent. A workplace environment can become hazardous at any moment. Hard hats are designed with this aspect in mind. They protect you from sudden hazards. Accidents occur without notice and you may not have time to move out before an object falls or substance spills on you. Wearing hard hats can make injuries less severe and this allows you to continue working after recovery.

The Benefits of Wearing Safety Footwear

Safety Wear at Work is a Must

Working in an environment where your health and safety is properly controlled is something every employee is entitled to in the workplace. Whether it is in a factory, office, and construction site or in a public place, health and safety should not be ignored. To ensure maximum safety whilst working, you should be wearing the appropriate attire such as high visibility clothing; hard hats or any other PPE (Personal Protective Equipment), the one that seems to get overlooked is safety footwear. Why is ensuring we are wearing protective footwear important in the workplace?
Continue reading

Importance of Safety Workwear

Overview

Most employers are aware that safety workwear is a requirement under British law. Using the right workwear for the job is a critical factor in the working environment. Those who flaunt this requirement do so at their own risk. For instance, in case of an injury, an employer who does not provide his or her workers with the correct protective equipment could be sued. Therefore, providing the employees with such basic equipment is a great way to avoid costly lawsuits.

Summary

Safety workwear comprises all the gear that is required by employees in order to keep them safe from hazards at the workplace. Failing to provide the workers with this equipment could cause a construction site to be shut down. In fact, this is the first thing to be checked by safety regulation officials. Once an occupational safety and health official arrives at a construction site, they first check if all workers have all the necessary protective equipment required for the job. Generally, this equipment is designed to make sure that the workers do not have less quality of life due to their work.

It is important for all employers to take time to understand the purpose of this. They should not only do it to comply with government regulations, but also because it concerns the health of fellow human beings. Providing employees with the right safety equipment means they are able to concentrate fully on the task. When an employee does not have full confidence in the protectiveness of their equipment, quality of work deteriorates. This because, they are always doing their work with one eye open for potential hazards at the workplace. In addition to that, a company is likely to attract a more competent skilled force if it has such measures in place.
When an organization fails to protect the health and safety of its employees, it will lead to bad publicity. With the revolution in how information is shared, it will likely reach the masses very fast. This could have a disastrous effect on the organisation’s returns. This equipment is usually comparatively cheap and easy to access. Thus, it is foolhardy for a company to try to avoid such a responsibility by denying employees the right safety equipment. Choosing the right equipment should be done in consultation with the employees. Innovations in technology mean there are many options available from which an organisation can choose from. One must ensure that the equipment they choose does not interfere with how efficiently workers are able to accomplish their tasks.

Conclusion

Providing workers with the right safety workwear is not only great, but it is a requirement under British law. Having satisfied employees lead to an increase in productivity. Besides that, it portrays the company as compassionate about the welfare of fellow human beings. Because the requirements of safety workwear are so valid, it is important to choose the right equipment. This has the advantage of protecting the employees while saving the organisation unnecessary exorbitant costs. The easiest way to do this is to hire a quality health and safety expert. In addition, one can outsource the service of a consultancy firm if employing one permanently is more expensive.